com.aspose.words
Class FieldToa

java.lang.Object
  Field
      com.aspose.words.FieldToa

public class FieldToa 
extends Field

FieldToa

public FieldToa()

public java.lang.String getBookmarkName() / public void setBookmarkName(java.lang.String value)

Gets or sets the name of the bookmark that marks the portion of the document used to build the table.

public FieldEnd getEnd()

Gets the node that represents the field end.

public java.lang.String getEntryCategory() / public void setEntryCategory(java.lang.String value)

Gets or sets the integral category for entries included in the table.

public java.lang.String getEntrySeparator() / public void setEntrySeparator(java.lang.String value)

Gets or sets the character sequence that is used to separate a table of authorities entry and its page number.

public FieldFormat getFormat()

Gets a FieldFormat object that provides typed access to field's formatting.

public java.lang.String getHeading() / public void setHeading(java.lang.String value)

Gets or sets a category heading for the entries in a table of authorities.

public boolean isLocked() / public void isLocked(boolean value)

Gets or sets whether the field is locked (should not recalculate its result).

public java.lang.String getPageNumberListSeparator() / public void setPageNumberListSeparator(java.lang.String value)

Gets or sets the character sequence that is used to separate two page numbers in a page number list.

public java.lang.String getPageRangeSeparator() / public void setPageRangeSeparator(java.lang.String value)

Gets or sets the character sequence that is used to separate the start and end of a page range.

public boolean getRemoveEntryFormatting() / public void setRemoveEntryFormatting(boolean value)

Gets or sets whether to remove the formatting of the entry text in the document from the entry in the table of authorities.

public java.lang.String getResult() / public void setResult(java.lang.String value)

Gets or sets text that is between the field separator and field end.

Example:

Inserts a field into a document using DocumentBuilder.

Document doc = new Document();
DocumentBuilder builder = new DocumentBuilder(doc);

// Insert a simple Date field into the document.
// When we insert a field through the DocumentBuilder class we can get the
// special Field object which contains information about the field.
Field dateField = builder.insertField("DATE \\* MERGEFORMAT");

// Update this particular field in the document so we can get the FieldResult.
dateField.update();

// Display some information from this field.
// The field result is where the last evaluated value is stored. This is what is displayed in the document
// When field codes are not showing.
System.out.println(MessageFormat.format("FieldResult: {0}", dateField.getResult()));

// Display the field code which defines the behaviour of the field. This can been seen in Microsoft Word by pressing ALT+F9.
System.out.println(MessageFormat.format("FieldCode: {0}", dateField.getFieldCode()));

// The field type defines what type of field in the Document this is. In this case the type is "FieldDate"
System.out.println(MessageFormat.format("FieldType: {0}", dateField.getType()));

// Finally let's completely remove the field from the document. This can easily be done by invoking the Remove method on the object.
dateField.remove();

public FieldSeparator getSeparator()

Gets the node that represents the field separator. Can be null.

public java.lang.String getSequenceName() / public void setSequenceName(java.lang.String value)

Gets or sets the name of a sequence whose number is included with the page number.

public java.lang.String getSequenceSeparator() / public void setSequenceSeparator(java.lang.String value)

Gets or sets the character sequence that is used to separate sequence numbers and page numbers.

public FieldStart getStart()

Gets the node that represents the start of the field.

public int getType()

Gets the Microsoft Word field type. The value of the property is FieldType integer constant.

Example:

Inserts a field into a document using DocumentBuilder.

Document doc = new Document();
DocumentBuilder builder = new DocumentBuilder(doc);

// Insert a simple Date field into the document.
// When we insert a field through the DocumentBuilder class we can get the
// special Field object which contains information about the field.
Field dateField = builder.insertField("DATE \\* MERGEFORMAT");

// Update this particular field in the document so we can get the FieldResult.
dateField.update();

// Display some information from this field.
// The field result is where the last evaluated value is stored. This is what is displayed in the document
// When field codes are not showing.
System.out.println(MessageFormat.format("FieldResult: {0}", dateField.getResult()));

// Display the field code which defines the behaviour of the field. This can been seen in Microsoft Word by pressing ALT+F9.
System.out.println(MessageFormat.format("FieldCode: {0}", dateField.getFieldCode()));

// The field type defines what type of field in the Document this is. In this case the type is "FieldDate"
System.out.println(MessageFormat.format("FieldType: {0}", dateField.getType()));

// Finally let's completely remove the field from the document. This can easily be done by invoking the Remove method on the object.
dateField.remove();

public boolean getUsePassim() / public void setUsePassim(boolean value)

Gets or sets whether to replace five or more different page references to the same authority with "passim", which is used to indicate that a word or passage occurs frequently in the work cited.

public java.lang.String getFieldCode()
                   throws java.lang.Exception

Returns text between field start and field separator (or field end if there is no separator).

Example:

Inserts a field into a document using DocumentBuilder.

Document doc = new Document();
DocumentBuilder builder = new DocumentBuilder(doc);

// Insert a simple Date field into the document.
// When we insert a field through the DocumentBuilder class we can get the
// special Field object which contains information about the field.
Field dateField = builder.insertField("DATE \\* MERGEFORMAT");

// Update this particular field in the document so we can get the FieldResult.
dateField.update();

// Display some information from this field.
// The field result is where the last evaluated value is stored. This is what is displayed in the document
// When field codes are not showing.
System.out.println(MessageFormat.format("FieldResult: {0}", dateField.getResult()));

// Display the field code which defines the behaviour of the field. This can been seen in Microsoft Word by pressing ALT+F9.
System.out.println(MessageFormat.format("FieldCode: {0}", dateField.getFieldCode()));

// The field type defines what type of field in the Document this is. In this case the type is "FieldDate"
System.out.println(MessageFormat.format("FieldType: {0}", dateField.getType()));

// Finally let's completely remove the field from the document. This can easily be done by invoking the Remove method on the object.
dateField.remove();

public Node remove()
           throws java.lang.Exception

Removes the field from the document. Returns a node right after the field. If the field's end is the last child of its parent node, returns its parent paragraph. If the field is already removed, returns null.

Example:

Inserts a field into a document using DocumentBuilder.

Document doc = new Document();
DocumentBuilder builder = new DocumentBuilder(doc);

// Insert a simple Date field into the document.
// When we insert a field through the DocumentBuilder class we can get the
// special Field object which contains information about the field.
Field dateField = builder.insertField("DATE \\* MERGEFORMAT");

// Update this particular field in the document so we can get the FieldResult.
dateField.update();

// Display some information from this field.
// The field result is where the last evaluated value is stored. This is what is displayed in the document
// When field codes are not showing.
System.out.println(MessageFormat.format("FieldResult: {0}", dateField.getResult()));

// Display the field code which defines the behaviour of the field. This can been seen in Microsoft Word by pressing ALT+F9.
System.out.println(MessageFormat.format("FieldCode: {0}", dateField.getFieldCode()));

// The field type defines what type of field in the Document this is. In this case the type is "FieldDate"
System.out.println(MessageFormat.format("FieldType: {0}", dateField.getType()));

// Finally let's completely remove the field from the document. This can easily be done by invoking the Remove method on the object.
dateField.remove();

public void update()
           throws java.lang.Exception

Performs the field update. Throws if the field is being updated already.

Example:

Inserts a field into a document using DocumentBuilder.

Document doc = new Document();
DocumentBuilder builder = new DocumentBuilder(doc);

// Insert a simple Date field into the document.
// When we insert a field through the DocumentBuilder class we can get the
// special Field object which contains information about the field.
Field dateField = builder.insertField("DATE \\* MERGEFORMAT");

// Update this particular field in the document so we can get the FieldResult.
dateField.update();

// Display some information from this field.
// The field result is where the last evaluated value is stored. This is what is displayed in the document
// When field codes are not showing.
System.out.println(MessageFormat.format("FieldResult: {0}", dateField.getResult()));

// Display the field code which defines the behaviour of the field. This can been seen in Microsoft Word by pressing ALT+F9.
System.out.println(MessageFormat.format("FieldCode: {0}", dateField.getFieldCode()));

// The field type defines what type of field in the Document this is. In this case the type is "FieldDate"
System.out.println(MessageFormat.format("FieldType: {0}", dateField.getType()));

// Finally let's completely remove the field from the document. This can easily be done by invoking the Remove method on the object.
dateField.remove();